Product SKUs | |
MBD-X8DTN+ -O | X8DTN+ (Standard Retail Pack) |
MBD-X8DTN+ -B | X8DTN+ (Bulk Pack) |
Physical Stats | |
Form Factor | Extended ATX |
Dimensions | 13.68" x 13" (34.7cm x 33cm) |
Processor/Cache | |
CPU | Dual 1366-pin LGA Sockets |
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: | |
Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor) | |
QPI | up to 6.4 GT/s |
System Memory | |
Memory Capacity | Eighteen 240-pin DIMM sockets |
Supports up to 144 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory | |
Memory Mirroring supported | |
Memory Type | 1333 / 1066 / 800MHz Registered ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.5 V |
Error Detection | Corrects single-bit errors |
Detects double-bit errors (using ECC memory) | |
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | |
On-Board Devices | |
Chipset | Intel® 5520 (Tylersburg) chipset |
ICH10R + IOH-36D | |
SATA | Intel ICH10R SATA 3.0Gbps Controller |
RAID 0, 1, 5, 10 support | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
200-pin IPMI slot (SIMLP) | |
Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
Intel® I/OAT 3 support for fast, scaleable, and reliable networking | |
VMDq support for better performance of virtualization | |
Graphics | ATI ES1000 controller with 32 MB of video memory |
Super I/O | Winbond 83627HF chip |
Input / Output | |
Serial ATA | Six Serial ATA ports |
Six SATA hard drives supported | |
IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card |
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | |
Floppy | 1 Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | 2x USB rear ports |
2x USB on-board | |
2x USB internal headers( 3 ports) | |
7 total USB ports, 2.0 Compliant | |
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | 1 Fast UART 16550 serial port |
1 Fast UART 16550 serial header (Option) | |
Expansion Slots | |
PCI-Express | 2 (x8) PCI-E slots (1 in x16 slot) |
1 (x4) PCI-E slot (in x8 slot) | |
PCI-X | 1x 64-bit 133MHz PCI-X (3.3V) slots |
2x 64-bit 133/100MHz PCI-X (3.3V) slots | |
UIO | 1 UIO slot (PCI-E 2.0 x8 slot) |
System BIOS | |
BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features | Plug and Play (PnP) |
PCI 2.2 | |
ACPI up to 3.0 | |
USB Keyboard support | |
Management | |
Software | Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5 |
Power Configurations | ACPI / ACPM Power Management |
PC Health Monitoring | |
CPU | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages. |
5-Phase-switching voltage regulator | |
FAN | Total of eight fan headers supporting up to 8 fans |
Eight 4-pin fan headers | |
8x fans with tachometer status monitoring | |
Support 3-pin fans (w/o speed control) | |
Low noise fan speed control (4-pin fan only) | |
Temperature | Monitoring for CPU and chassis environment |
Thermal Control for 8x fan connectors | |
PECI | |
Other Features | Chassis intrusion detection |
Chassis intrusion header | |
Operating Environment / Compliance | |
RoHS | |
Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) |
Non-operating Temperature: -40° to 70° C (-40° to 158° F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | |
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
Ý kiến bạn đọc