Bo mạch chủ Supermicro Workstation Board X8DTG-QF Bo mạch chủ Supermicro Workstation Board X8DTG-QF
  • Mã sản phẩm: X8DTG-QF
  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Intel® 5520 (Tylersburg) Chipset
  • Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM
  • 4 (x16) PCI-E 2.0, 2 (x4) PCI-E 2.0 (in x16 and x8 slots),
  • 1 (x4) PCI-E (in x16 slot), 2 32-bit PCI slots
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • 6x SATA2 (3 Gbps) Ports via ICH10R Controller
  • Integrated Matrox G200eW Graphics
  • Integrated IPMI 2.0 with Dedicated LAN
X8DTG-QF Bo mạch chủ Main Server Số lượng: 1 Chiếc


  •  
  • Bo mạch chủ Supermicro Workstation Board X8DTG-QF

  • Đăng ngày 27-06-2018 07:11:34 PM - 219 Lượt xem
  • Mã sản phẩm: X8DTG-QF
    • Mã sản phẩm: X8DTG-QF
    • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
    • Intel® 5520 (Tylersburg) Chipset
    • Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM
    • 4 (x16) PCI-E 2.0, 2 (x4) PCI-E 2.0 (in x16 and x8 slots),
    • 1 (x4) PCI-E (in x16 slot), 2 32-bit PCI slots
    • Dual Intel® 82574L Gigabit Ethernet Controller
    • 6x SATA2 (3 Gbps) Ports via ICH10R Controller
    • Integrated Matrox G200eW Graphics
    • Integrated IPMI 2.0 with Dedicated LAN


Số lượng
Product SKUs
MBD-X8DTG-QF -B X8DTG-QF (Server Only)
Physical Stats
Form Factor Proprietary
Dimensions 15.2" x 13 " (38.61cm x 33.02cm)
Processor/Cache
CPU * Dual 1366-pin LGA Sockets
* Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
o Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor)
QPI up to 6.4 GT/s
System Memory
Memory Capacity * 12x 240-pin DIMM sockets
* Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
* Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
* Memory Mirroring supported
Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB, 8GB
Memory Voltage 1.5 V
Error Detection * Corrects single-bit errors
* Detects double-bit errors (using ECC memory)
* Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset Intel® 5520 (Tylersburg) chipset
ICH10R + 2x IOH-36D
SATA Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
Network Controllers 2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics Matrox G200eW 16MB DDR2
Super I/O Winbond 83827HG chip
Input / Output
Serial ATA Six Serial ATA ports
Six SATA hard drives supported
LAN 2x RJ45 LAN ports
USB 2x USB rear ports
2x USB internal headers
Total 4 USB 2.0 Compliant
VGA 1x VGA Port
Serial Port 1x Serial Port
Chassis ( Optimized for X8DTG-QF )
Tower / 4U Rackmount CSE-747TQ-R1400
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
Expansion Slots
PCI-Express 4 (x16) PCI-E 2.0
2 (x4) PCI-E 2.0
1 (x4) PCI-E (in x16 slot)
PCI 2x 32-bit 33MHz PCI slots
System BIOS
BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features * Plug and Play (PnP)
* PCI 2.2
* ACPI up to 3.0
* USB Keyboard support
Management
Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Super Doctor III
Power Configurations ACPI / ACPM Power Management
PC Health Monitoring
CPU * Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
* 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN * Total of eight fan headers supporting up to 8 fans
* Eight 4-pin fan headers
* 8x fans with tachometer status monitoring
* Support 3-pin fans (w/o speed control)
* Low noise fan speed control
Temperature * Monitoring for CPU and chassis environment
* Thermal Control for 8x fan connectors
* PECI
Other Features Chassis intrusion detection
Chassis intrusion header
Operating Environment / Compliance
RoHS RoHS Compliant 6/6, Pb Free
Environmental Spec. * Operating Temperature: 10° to 35° C (50° to 95°F)
* Non-operating Temperature: -40° to 70° C (-40° to 158° F)
* Operating Relative Humidity: 8% to 90% (non-condensing)
* Non-operating Relative Humidity: 5 to 95% (non-condensing)

  Ý kiến bạn đọc

Mã bảo mật   
     

 

Thống kê

  • Đang truy cập10
  • Hôm nay768
  • Tháng hiện tại15,731
  • Tổng lượt truy cập545,063
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây