Product SKUs | |
MBD-X8DTL-i -O | X8DTL-i (Standard Retail Pack) |
MBD-X8DTL-i -B | X8DTL-i (Bulk Pack) |
Physical Stats | |
Form Factor | ATX |
Dimensions | 12" x 10" (30.5cm x 25.4cm) |
Processor/Cache | |
CPU | Dual 1366-pin LGA Sockets |
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below | |
Intel® Xeon®Processor 5600 Series (Westmere) Intel® Xeon®Processor 5500 Series (Nehalem-EP) | |
QPI | up to 6.4 GT/s |
System Memory | |
Memory Capacity | 6x 240-pin DIMM sockets |
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory | |
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory | |
Memory Mirroring supported | |
Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB |
Memory Voltage | 1.5 V |
Error Detection | Corrects single-bit errors |
Detects double-bit errors (using ECC memory) | |
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | |
On-Board Devices | |
Chipset | Intel® 5500 (Tylersburg) chipset |
ICH10R + IOH-24D | |
SATA | Intel ICH10R SATA 3.0Gbps Controller |
RAID 0, 1, 5, 10 support (Windows) | |
RAID 0, 1, 10 support (Linux) | |
Network Controllers | 2x Intel® 82574L Gigabit Ethernet Controllers |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
Graphics | Matrox G200eW |
Super I/O | Winbond® 83627DHG-P chip |
Input / Output | |
Serial ATA | Six Serial ATA ports |
Six SATA hard drives supported | |
LAN | 2x RJ45 LAN ports |
USB | 2x USB rear ports |
1x USB on-board | |
2x USB internal headers | |
Total 5 USB 2.0 Compliant | |
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | 1 Fast UART 16550 serial port |
1 Fast UART 16550 serial header (Option) | |
Expansion Slots | |
PCI-Express | 2 (x8) PCI-E 2.0 (1 in x16 slot) |
1 (x4) PCI-E 2.0 (in x8 slot) | |
1 (x4) PCI-E (in x8 slot) | |
PCI | 2x 33MHz PCI slots |
System BIOS | |
BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features | Plug and Play (PnP) |
PCI 2.2 | |
ACPI up to 3.0 | |
USB Keyboard support | |
Management | |
Software | Super Doctor III |
Power Configurations | ACPI / ACPM Power Management |
PC Health Monitoring | |
CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. |
4-Phase-switching voltage regulator | |
FAN | Total of six fan headers supporting up to 6 fans |
Six 4-pin fan headers | |
6x fans with tachometer status monitoring | |
Support 3-pin fans (w/o speed control) | |
Low noise fan speed control (4-pin fan only) | |
Temperature | Monitoring for CPU and chassis environment |
Thermal Control for 6x fan connectors | |
PECI | |
Other Features | Chassis intrusion detection |
Chassis intrusion header | |
Operating Environment / Compliance | |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) |
Non-operating Temperature: -40° to 70° C (-40° to 158° F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | |
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
Ý kiến bạn đọc